All Pro 12

• High production, low profile plant 12 cubic yard plant
• Blending cement batcher improves concrete cement quality
• Expandable for increased production capacity
• Compact configurations – lower installation and enclosure costs
• Column freetruck charging access

• Superior structural strength
• One piece unitized modular design
• Low overall height minimizes foundation expense
• Blending cement batcher to pre-blend cementatious materials
• Accumulative weighing aggregate batcher
• Plant mounted single or two compartment cement silo
• 180 degree column free truck loading
• Overbite fill gate with quick dump valve fill gate operation
• Direct shear beam solid load cell systems
• Precision built screw conveyors
• Self relieving angled aggregate batcher discharge gates
• Pre-wired, Pre-plumbed, Pre-assembled plus Factory Checkout
• Dust control mounting directly above cement batcher for easy material reclaim
• U.L. listed service panel
• High volume, low pressure aeration system and manifold distribution
• Hot dipped galvanized stairways, ladders, cages, roof railings and conveyors
• On site factory start up

PRODUCTION CAPACITY

• Theoretical Cycle Time — 2.5 to 3 minutes

BATCHER CAPACITY

• Aggregate – 1 to 5 cubic yards (3.8 cubic meters)
• Cement – 1 to 5 cubic yards (3.8 cubic meters)
• Scales – Direct load cells

AGGREGATE DISCHARGE CONVEYOR

• 24” wide (610 mm) with 10 horsepower drive. Optional 30” (762 mm), 10 horsepower drive.

CEMENT BATCHER RECIRCULATING SCREW

• 12” diameter (305 mm), 10 horsepower

HIGH PRESSURE AIR COMPRESSOR

• 5 horsepower with 80 gallon (0.30 cubic meters) receiver. Optional 10 horsepower, 80 gallon (0.30 cubic meters).

ELECTRICAL

• 460 volt, 3-phase with 120 VAC transformer for control voltage. All motors are TEFC. All motor circuit wiring protected by individual circuit breakers. Electrical components housed in NEMA steel enclosures. Wiring in conduit.

BATCH CONTROL SYSTEM

• Semi-automatic cut-off of cement by presets on digital readouts. Push-button for electric over air on gates. Optional fully automatic computerized batch control system

WATER METER

• 3” diameter (77 mm) with up to 500 gallons (1,740 liters) per minute.

CEMENT FEEDER SCREW CONVEYOR

• 6” diameter (152 mm), 10 horsepower drive plus 25’0”
• (7,620 mm) long, 4’ x 4’ receiving hopper

TRANSPORTATION SYSTEM

• Rear-mounted 19,000 lb. (9,090 kg) capacity single axle with four (4) 295/75R 22.5 tires, air brakes, heavy-duty spring suspension, and fifth wheel rub plate with king pin.

DIMENSIONS

• Towing length……………39’0” (11,888 mm)
• Towing height……………14’3” (4,343 mm)
• Towing width……………..8’0” (2,440 mm)
• Empty weight, total………30,000 lbs. (13,608 kg)

SHIPPING DIMENSIONS

• Length…………………..…44’6” (13,564 mm)
• Height………………………13’10” (4,216 mm)
• Width……………………….8’0” (2,440 mm)
• Shipping Volume …………4,923 cubic feet (139 cubic meters)

NOTE

• In accordance with CON-E-CO’s policy of constantly improving its products, the above specifications are subject to change without notice. CON-E-CO assumes no responsibility for foundation design. Consult factory for column loadings.