SLP CM


Advantages

  • More yards per hour with 54” wide mixer charging belt
  • Plant mounted, multiple single or dual compartment cement silos
  • Factory assembled unitized base frame reduces installation cost
  • Flexible large multi compartment aggregate bin
  • Low profile aggregate bin reduces material handling expense

Features

  • Superior structural strength
  • Tilt mixer support structure part of plant understructure
  • Mixers at 12 or 15 cubic yard rated capacity
  • Two singe or dual compartment silos provide four types of cement
  • Expandable aggregate storage and bin configurations
  • Maintenance access platforms provide access to service areas
  • Large multi compartment aggregate bins provide flexible mix design
  • Oversized aggregate batcher for flexible mix design at rated capacity
  • Direct shear beam solid load cells for fast accurate weighing
  • Over bite fill gate design for fast accurate material weighing
  • Angled break away self relieving batcher gates
  • Quick dump valves for agg bin and batcher gate insure smooth operation
  • Pre-wired, Pre-plumbed, Pre-assembled plus Factory Checkout
  • U.L. listed service panel
  • High volume, low pressure aeration system and manifold distribution
  • Hot dipped galvanized stairways, ladders cages, roof railing and conveyors
  • On site factory start up
  • Customer specific engineering details

Specifications

PRODUCTION CAPACITY

  • Theoretical Cycle Time with 30 second mix time – 2 minutes

BATCHER CAPACITY

  • Aggregate – 1 to 12 cubic yards (1 to 9.2 cubic meters)
  • Cement – 1 to 12 cubic yards (1 to 9.2 cubic meters)
  • Scales – Direct load cells

MIXER CHARGING CONVEYOR

  • 48” wide (914 mm), 100 horsepower drive.
  • Optional 54” wide (1,370 mm), 150 horsepower drive

CEMENT II FEEDER SCREWS

  • 9” diameter (230 mm), 10 horsepower drive.
  • Optional 12” diameter (300 mm), 15 horsepower drive

CEMENT AERATION

  • 5 horsepower, high volume, low pressure blower

HIGH PRESSURE AIR COMPRESSOR

  • 20 horsepower, 120 gallon (0.45 cubic meters) receiver.
  • Optional 25 or 30 horsepower

ELECTRICAL

  • 460 volt, 3-phase with 120 VAC transformer for control voltage. All motors are TEFC. All motor circuit wiring protected by individual circuit breakers. Electrical components housed I NEMA steel enclosures. Wiring in conduit.

BATCH CONTROL SYSTEM

  • Optional fully automatic computerized batch control system.

TRANSPORTATION SYSTEM

  • Rear-mounted tandem axle with eight (8) 295/75R 22.5 tires, wheels, air brakes, heavy duty spring suspension, tail and brake lights and fifth wheel rub plate with king pin

 

STORAGE CAPACITIES

AGGREGATE HEAPED VOLUME

  • 60 to 140 cubic yards
  • 46 to 107 cubic meters

CEMENT I GROSS VOLUME

  • 1,600 to 4,260 cubic feet
  • 45 to 120 cubic meters

CEMENT II GROSS VOLUME

  • 1,600 to 4,260 cubic feet
  • 45 to 120 cubic meters