CON-E-CO Dust Control Systems

Keeping Dust Off Trucks IncreasesYour Profit

• Reducing the time to rinse trucks after loading increases production
• Reducing driver cleaning maintenance increases the number of loads delivered to the job by each driver
• Reducing or eliminating acid bath cleanings doubles or triples the time between repainting
• Promoting a positive image increases market share

Serviceability

• Maintenance platforms with ladders and cages for easy maintenance access
• Totally enclosed, fan-cooled motors for protection against the elements

Electrical System

• Factory pre-wired system eliminates costly field wiring
• Factory-labeled, U.L. listed electrical panels

Pulse Jet Cleaning

• Aggressive cleaning for high-efficiency dust control
• Generous space between bags or cartridges prevents excessive vertical air velocity, allowing dust to release and fall into hopper
• Instantaneous pulse draws air from the large manifold on the dust collector to assure availability of air to pulse bags or cartridges

Optional Fill Line Automatic Pinch Valves

• Eliminates blinding of filter media from overfilling storage bins and silos

Optional PinchValve Air Supply

• Isolated 120-volt air compressor for after-hour deliveries

Optional Damper Valve

• Forces dust through filter media for after-hour deliveries when suction blower is not running

Optional High-Pressure Air Dryer

• Increases life of filter media
• Increases life of solenoid valves

Mobile central dust control

STANDARD FEATURES

• Pulse jet cleaning
• Work platforms with ladders and cages
• Pre-wired at factory
• Motor controls with circuit breakers
• Main disconnect with circuit breaker
• Factory U.L. listed panels
• NEMA 12 enclosures
• Automatic control panel
• Pre-plumbed at factory
• Solenoid valves mounted on manifolds with regulator
• Filler and lubricator n 7” diameter pressure relief valve (silo dust control systems)
• Weld-on riser and flange (silo dust control systems)
• Pulse jet bag type collector with 6:1 air-to-cloth ratio
• Pulse jet cartridge type collector with 5:1 air-to-cloth ratio

OPTIONAL FEATURES

• Manual reclaim system n Automatic reclaim system
• Silo expansion chamber for central dust control systems
• Silo ductwork for central dust control systems

Silo and truck charging dust control with optional water holding or weighted water lifting bale and reclaim-to-cement batcher

• Back-in or drive-in truck mixer shroud
• Drive-through truck mixer shroud
• Mixer ductwork for central and transit mixer
• Mobile transportation system
• High-pressure-supply air dryer

SILO DUST CONTROL SYSTEMS

• MODEL PJ-200
  • 202 sq.ft. of bag cleaning area
  • Capacity: 1,200 CFM
• MODEL PJ-300
  • 297 sq.ft. of bag cleaning area
  • Capacity: 1,800 CFM
• MODEL PJ-400
• 416 sq.ft. of bag cleaning area
• Capacity: 2,500 CFM
• MODEL PJC-300
• 300 sq.ft. of cartridge cleaning area
• Capacity: 1,500 CFM
• MODEL PJC-450
• 450 sq.ft. of cartridge cleaning area
• Capacity: 2,250 CFM
• MODEL PJC-600
• 608 sq.ft. of cartridge cleaning area
• Capacity: 3,040 CFM
• MODEL PJC-750
• 750 sq.ft. of cartridge cleaning area
• Capacity: 3,750 CFM

Ground-mounted dust control with automatic reclaim

• MODEL PJC-900
  • 912 sq.ft. of cartridge cleaning area
  • Capacity: 4,560 CFM
• MODEL PJC-1200
  • 1,216 sq.ft. of cartridge cleaning area
  • Capacity: 6,080 CFM

MIXER DUST CONTROL SYSTEM

• MODEL PJ-980
  • 980 sq.ft. of bag cleaning area
  • 15 HP blower at 5,880 CFM

CENTRAL DUST CONTROL SYSTEMS

• MODEL PJ-1400
• 1,427 sq.ft. of bag cleaning area
• 15 HP blower at 8,000 CFM
• MODEL PJ-2000
  • 1,962 sq.ft. of bag cleaning area
  • 20 HP blower at 10,500 CFM

MOBILE CENTRAL DUST CONTROL SYSTEM

• MODEL PJ-2000
  • 2,030 sq.ft. of bag cleaning area
  • 20 HP blower at 10,500 CFM
• MODEL PJ-2500
  • 2,496 sq.ft. of bag cleaning area
  • 30 HP blower at 15,000 CFM