CON-E-CO Premier PLP
Portable Low Profile Concrete Batch Plant

PRODUCTION CAPACITY
Theoretical capacity — 150 to 200 cubic yards per hour (110 to 165 cubic meters per hour).

BATCHER CAPACITY
Aggregate — Oversized, 12 cubic yards (9.2 cubic meters).
Cement — Oversized, 12 cubic yards (9.2 cubic meters).
Scales — Direct load cells and digital readouts.

AGGREGATE DISCHARGE CONVEYOR
30” wide (0.76 meters) with 15 horsepower drive.
Optional: 36” wide (0.44 meters) with 20 horsepower drive.

CEMENT II FEEDER SCREW OPTIONAL
9” diameter (0.23 meters) with 10 horsepower drive.
Optional: 12” (0.30 meters) with 15 horsepower drive.\

CEMENT AERATION
5 horsepower, high volume, low pressure blower.

HIGH PRESSURE AIR COMPRESSOR
7.5 horsepower with 80 gallon (0.30 cubic meter) receiver.
Optional: 10 horsepower, 120 gallon (0.45 cubic meter).

ELECTRICAL
200 amp, 3 phase with 120 VAC transformer for control voltage. All motors are TEFC. All motor circuit wiring protected by individual circuit breakers. Electrical components housed in NEMA 12 dust-tight steel enclosure. Wiring in conduit. Minimum service size: 100 KVA.

BATCH CONTROL SYSTEM
Semi-automatic cut-off of cement by presets on digital readouts. Pushbutton for electric over air on gates. Optional fully automatic computerized batch control system.

WATER METER
CON-E-CO, 2” diameter (50mm) all electronic stainless steel turbine, 25 to 300 GPM (94.5 to 1,134 liters per minute).
Optional: 3” diameter (77mm) with up to 500 GPM (1890 liters per minute).

NOTE: In accordance with CON-E-CO’s policy of constantly improving its products, the above specifications are subject to change without notice. CON-E-CO assumes no responsibility for foundation design. Consult factory for column loadings.

Download CON-E-CO Premier PLP Plant Information

Request additional information about the CON-E-CO Premier PLP Plant

Visit CON-E-CO
for additional information.